'gpd2846a'에 해당되는 글 1건

  1. 2020.12.09 MP3 Decoder with Built-in Amplifier Module (GPD2846A) 5
반응형

아래 링크의 제품과 거의 같지만 조금 더 심플한 MP3 디코더다. 


2020/11/29 - [Review] - MP3 Decoder with Built-in Amplifier Module


스위치나 터미널이 달려 있지 않아 그냥 사용하기 불편할 수 있지만 원하는 형태의 MP3 플레이어를 만들기는 더 좋다.


Micro SD카드 슬롯만 있는 작고 간단한 형태의 MP3 디코더 보드.


Pin assignment


1. V33REG DVDD33: Digital power 3.3V.

2. V50REG VMCU/BAT: Lithium battery input, 3.3V~5V.

3. VSSREG DVSS: Digital ground.

4. DACOL DACL: Left audio signal output.

5. VCOM: Center audio signal Vref, please plug 1uF capacitor voltage.

6. DACOR DACR: Right channel audio output.

7. LINEIN_R LineInR + L: LineIn left + right input.

8. IOA4: AD-key buttons.

9. IOA3 FMCLK: If IOA3 pull-down resistor to ground, IOA3 will output clock signal to the outside Hanging FM radio IC. If IOA3 is vacant, FM radio IC will take their 32768Hz crystal.

10. IOA2 Mute: Mute the external amplifier.

11. DM: USB of DM.

12. DP: USB of DP.

13. IOA0: IO-key/LED.

(1) Plug-in LED light: Output “1” represents the lit LED.

(2) IO-key1.

(3) Options are used to define the key mode.

14. IOB1 SD_CLK: Clock output T card/SD card. SD_DET: detecting whether there is an SD card is inserted, to read “0” on behalf of insertion. Please connect a 3.3KΩ resistance.

15. IOB0 SD_CMD: T card/SD card command and response. I2C_CLK: I2C the clock; the external EEPROM, and FM.

16. IOB2 SD_DAT: data input T card/SD Card/output. I2C_DAT: I2C of data; and external EEPROM FM.


3.7V 배터리나 (USB)5V 전원으로 작동 가능하며 Micro SD 카드에 듣고 싶은 음악을 담아 플레이 할 수 있다. 위 다이어그램과 같이 스위치와 4Ω 3W 스피커를 연결해 사용한다.


■ Previous/Volume--: 이전 곡 / 길게 누르면(약 2초) 소리 작게

■ Play/Stop: 플레이 / 정지

■ Next/Volume++: 다음 곡 / 길게 누르면 소리 크게


반응형
Posted by J-sean
: